Engineering Mode Overview - Vision Fitness S7100 Suspension elliptical Service Manual

5.2 enGineeRinG MoDe oVeRVieW

cuStoM SettinGS
P1 sEt Max tIME
P2 sEt UsEr tIME
P3 sEt UsEr aGE
P4 sEt wEIGht
P5 DEFaUlt rEsIstanCE
lEvEl
P6 DEFaUlt InClInE
lEvEl
P7 DEFaUlt lanGUaGE
P8 UnIt
P9 aCCUMUlatED Data
P10 DIsPlay tEst
P11 harDwarE tEst
P12 InClInE rEsEt
P13 InClInE CalIBratIon
P14 aDjUst InClInE
P15 BEEPEr MoDE
P16 saFEty MoDE
P17 vErsIon
14
cHapteR 5: enGineeRinG MoDe
MiniMuM MaxiMuM
20 99
10 99
10 100
80 300
1 20
1 20
EnGlIsh EnGlIsh
MIlE KIloMEtEr
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a 544
33 544
on oFF
on oFF
n/a n/a
unit DEsCrIPtIon
MInUtE Maximum workout duration.
MInUtE Default start time in all programs.
yEars Default age used in all programs.
PoUnDs Default weight used in all programs.
n/a Default resistance level used in all
programs.
n/a Default incline level used in all
programs.
n/a the native language prompts in the
display.
n/a Determines what unit of measurement
to use for distance.
n/a this option shows the total amount of
accumulated distance and time, not
editable
n/a this option allows you to test the
display lEDs for function. Press the
EntEr key to test the center column.
Press the InClInE arrow keys
to test the dot / dashes. Press the
rEsIstanCE arrow keys to test
the numbers.
n/a this option allows you to test the
resistance, speed, and hr. Press
the rEsIstanCE arrow keys to
test the resistance. Pedal the unit to
test the speed. Use the hr grips or a
hr strap to test the hr function.
n/a Determines if the incline setting
resets between users.
n/a this option calibrates the incline
motor.
n/a this option adjusts the incline values
(maximum & minimum).
n/a this option allows you to turn the
beep from button depression off or
on.
n/a this option will default the ECB
resistance level to maximum between
users as a safety precaution.
n/a this option will give you the software
version, not editable.