Console Mast Cover Replacement - Vision Fitness S7100 Suspension elliptical Service Manual

7.4 fRont conSole MaSt coVeR ReMoVal
1) remove the console as outlined in section 7.2.
2) remove the cup holder assembly as outlined in section 7.3.
3) remove the 2 screws holding the slotted console mast cover to the console mast (Figure a).
4) remove the 8 screws (4 on each side) holding the slotted console mast cover to the front console mast cover (Figure B).
fiGuRe a
5) Move the slotted console mast cover out of the way (the cover cannot be removed without removing the incline motor bracket) (Figure C).
6) lift the console mast boot, and remove the 2 screws holding the front console mast cover to the frame and remove the front console cover
(Figure D).
fiGuRe c
7) reverse steps 1-6 to install a new front console mast cover.
26
cHapteR 7: paRt ReplaceMent GuiDe
fiGuRe b
fiGuRe D