cHapteR 7: paRt ReplaceMent GuiDe
7.9 incline MotoR ReplaceMent
1) TIP: Press start, then incline the unit to its top position. hold the start key to reset the console, and then press any key to stop the
incline from resetting. It will be much easier to remove the incline motor with the incline in the top position.
2) remove the front shrouds as outlined in section 7.1.
3) Disconnect the incline motor wire harness (Figure a).
4) remove the screw / nut holding the incline motor bracket to the incline motor (Figure B).
fiGuRe a
fiGuRe b
5) remove the screw / nut holding the incline motor to the frame (Figure C) and remove the incline motor.
fiGuRe c
5) reverse steps 1-4 to install a new incline motor.
6) test the suspension elliptical for function as outlined in section 7.21
32