Care And Maintenance Instructions - Vision Fitness S7100 Suspension elliptical Service Manual

cHapteR 3: pReVentatiVe Maintenance

3.3 caRe anD Maintenance inStRuctionS

In order to maximize life span, and minimize down time, all vision
Fitness equipment requires regular cleaning, and maintenance items
performed on a scheduled basis. this section contains detailed
instructions on how to perform these items and the frequency of
which they should be done. some basic tools and supplies will be
necessary to perform these tasks which include (but may not be
limited to):
* Metric allen wrenches
* #2 Phillips head screwdriver
* adjustable wrench
* torque wrench (capability to read foot lbs and inch lbs)
* lint free cleaning cloths
* teflon based spray lubricant such as "super lube" or other vision
Fitness approved products.
* Mild water soluble detergent such as "simple Green" or other
vision Fitness approved products
* vacuum cleaner with an extendable hose and crevasse tool
attachment.
you may periodically see addendums to this document, as the
vision Fitness technical support team identifies items that require
specific attention, the latest version will always be available on the
vision web site at www.visionfitness.com.
DAILY MAINTENANCE ITEMS
1) look and listen for loose fasteners, unusual noises, and any
other indications that the equipment may be in need of service.
2) Clean the suspension elliptical before and after each use,
including:
a. Use a damp, soft cloth with water or mild liquid detergent
to clean all exposed surfaces. Do not use ammonia, chlorine, or
any acid based cleaners.
b. Keep the console display free of fingerprints and salt build
up caused by sweat.
c. Frequently vacuum the floor beneath the unit to prevent the
accumulation of dust and dirt which can affect the smooth operation
of the unit.
MONTHLY MAINTENANCE ITEMS
1) Inspect the console, handrails, suspension arms, pedal arms,
and pedals for damage.
2) Check the suspension / pedal arms for loose joints, tighten
hardware as needed.
3) Check pedal motion and stability.
4) adjust the leveling feet if the equipment rocks or wobbles.
5) Inspect the power cord for damage.
QUARTERLY MAINTENANCE ITEMS
1) remove the front shrouds and check belts for damage,
alignment, and proper tension.
7