Table of Contents
Advertisement
6
Cable Connectors and Unused Connector
Protection
The following figure shows the various components found in the connector kit supplied with the
AP3550. If a different connector is used (or the connector is replaced), the replacement must be IP56
certified to retain product sealing.
The cable shown in the figure is customer provided and must be of the length required for your specific
AP3550 deployment. The cable must be rated for outdoor use and have 8 conductors. Shielding is not
required for the cable used.
To install the AP3550 cabling:
1 Install the silicone rubber gland into the gland housing.
Altitude 3550 Access Point Deployment Guide
27
Advertisement
Table of Contents
