Table of Contents
Advertisement
Cable Gland Adapter Assembly
2. Loop the console port cap tie to the back of the access point, and place it on top of the tether screw
hole.
Figure 18: Console port cap tie installation
3. Add the Phillips head screw through the console port cap tie and tether screw hole.
4. Toque the screw to 6.0 lb-in.
Related Topics
AP460i/e Features
Cable Gland Adapter Assembly
Before You Begin
Before connecting the RJ45 cable, a waterproof cable gland adapter assembly must be installed onto
the cable.
Important
The cable glands must be torqued properly to protect the access point from water intrusion.
38
ExtremeWireless™ AP460i/e Access Points
on page 8
GE and Console Connections
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWireless AP460i and is the answer not in the manual?
Questions and answers