Extreme Networks Altitude 3550 Deployment Manual page 19

4 Install the mounting bracket to the AP3550's rear housing using 4 short length binder head screws
from kit.
The heavy weather shield is clamped between the bracket and the housing. Tighten securely.
5 Turn the unit over. On the face of the unit, remove and discard the 4 screws located in the cover of
the AP3550.
6 Install 4 hex stand-off screws into the screw holes created with the removal of the screws in step 5.
Tighten securely.
Altitude 3550 Access Point Deployment Guide
19