Table of Contents
Advertisement
• Mount the device with the black gore vent down.
• Mounting height for network devices should not exceed 30 to 35 feet. Mounting height
should vary to accommodate the topography of the deployment area, foliage, and other
obstructions.
• Devices can be deployed using any of the recommended outdoor deployment
procedures.
Line of Sight (LoS) guidelines should be given special consideration when deploying
devices.
Hardware Overview
The AP-7562 is a 3x3:3 802.11ac Access Point utilizing one 2.4 GHz 802.11n radio and one 5
GHz 802.11ac radio.
An AP-7562 must be installed by trained professionals familiar with RF planning and
regulatory limits defined by the regulatory bodies of the country where the devices are
being deployed. All common precautions for grounding and Electrostatic Discharge (ESD)
protection should be observed during deployment and installation. AP-7562 Access Points
must be installed such that no harmful interference results from device operation.
Ports and Connections
The AP-7562 Access Point has the following port designations:
• Antenna ports R1-A, B and C, R2-A, B and C
• Console port
• GE1/POE - LAN port
• GE2 - WAN port
Antenna Connectors
AP-7562 Installation Guide
Introduction
12
Hide quick links:
Advertisement
Table of Contents
