Reboot; Warmboot; Restart (Or Cold Boot) - Honeywell MX9 Reference Manual

Reboot

When the Windows desktop is displayed or an application begins, the power up (or reboot) sequence is complete.

Warmboot

A warmboot reboots the MX9 without erasing any registry data. Applications and data in RAM are preserved during a
warmboot.
All registry configurations are automatically preserved. Any applications stored as .CAB files in the System folder and
configured in the Registry to persist are reinstalled on boot up by the Launch utility.
Use the Registry control panel Warmboot button.
Note: There may be slight delays while the wireless client connects to the network, re-authorization for voice-enabled
applications completes, Wavelink Avalanche management of the MX9 startup completes, or Bluetooth relationships
establish or re-establish.

Restart (or Cold Boot)

The Restart (or cold boot) function reboots the device, erases all registry data, and user-specified settings. The factory default
settings are restored when the MX9 powers on again.
Use the Registry control panel Restart button to set the registry back to Honeywell factory defaults. No other clearing is
available or necessary.
Note: Because of the extreme nature of restart, Honeywell recommends using this command only as an emergency (or
when instructed to do so as part of a specific MX9 procedure).
1-12