Chapter 8: Keymaps; Introduction; 62-Key Keypad Keymap - Honeywell MX9 Reference Manual

Chapter 8: KeyMaps

Introduction

The keypad is available in a 62-key or 38-key configuration. The 62-key keypad is also available in an IBM 5250 configuration.
When using a sequence of keys that includes a sticky key, press the sticky key first, release it, then press the rest of
l
the key sequence.
Sticky keys do not need to be held down while pressing the next (or desired) key.
l
When using a sequence of keys that includes the Orange or Blue keys, press the color key first then the rest of the key
l
sequence.
Alphabetic keys default to lower case letters. Press the Shft/Shift key, then the alphabetic key for an uppercase letter.
l
Note: In general, sticky keys refer to those keys that, when pressed once and released, are still in effect and affect the
function of the next key pressed.

62-Key Keypad KeyMap

The following keypad keymap is used on an MX9 that is not running a Terminal Emulator. Terminal emulators use a separate
keymap.
A modifier key pressed after itself toggles that modifier key off.
Modifier keys pressed following any other modifier key clears earlier modifier keys.
Any key press, other than the up arrow or down arrow, exits the volume control and backlight control.
To get this function
Windows key
On (when Off)
Suspend toggle (when
On)
Volume Up
Volume Up
Volume Down
Volume Down
Display Backlight
Lighter
Display Backlight
Darker
Alt mode
Ctl mode
Escape
Space
Press these keys in this order
CTL
Power
Power
Orange
Blue
Orange
Blue
Blue
Blue
ALT
CTL
ESC
SPC
ESC
Right Scan
V
Right Scan
V
Right Scan
Right Scan
Up Arrow
Up Arrow
Down Arrow
Down Arrow
Up Arrow
Down Arrow
Result / Notes
Windows Start menu
Power On
Suspend or Resume
mode
Volume increases
Volume increases
Volume decreases
Volume decreases
Backlight lighter
Backlight darker
Alt mode
Control mode
Escape
Space
8-1