Serial Connection; Cable For Serial Activesync Connection; Wireless Connection - Honeywell MX9 Reference Manual

Serial Connection

The connection type must be changed to Serial 1 @ 57600.
To change the connection type select
Start > Settings > Control Panel > PC Connection
Tap the Change button. From the popup list, choose
Serial 1 @ 57600
This will set up the mobile device to use the serial port. Tap OK and ensure the check box for "Allow connection with desktop
computer when device is attached" is checked.
Tap OK to return to the Control Panel. If desired, any control panel windows may be closed.
Select Start > Settings > Scanner and ensure the integrated scanner is set to a port that is NOT the same as the ActiveSync
port.
Connect the correct cable to the PC (the host) and the mobile device (the client). Select "Connect" from the Start Menu on the
client (Start > Programs > Communications > Connect).
Note: Run "Connect" when the "Get Connected" wizard on the host PC is checking COM ports to establish a connection for
the first time.

Cable for Serial ActiveSync Connection

MX9055CABLE - MX9 Serial Cable Assembly (ActiveSync connection)
Connect the I/O connector to the I/O port on the bottom of the MX9.
l
The serial port on the MX9 cable connects to a COM port on a PC or laptop.
l
It is not necessary to connect the power receptacle to the MX9 power adapter in order to use ActiveSync. Do not allow
l
the MX9 to enter Suspend while connected.

Wireless Connection

Note: You must establish a partnership with a desktop computer prior to running ActiveSync on the mobile device. The initial
partnership must be done using direct serial or USB cable connection.
Once the relationship is established using the serial port, the ActiveSync link in the Start Menu gives a choice of connections,
one of which is Network.
Select Start > Settings > Programs > Communication > ActiveSync. From the popup list, choose Network and then tap
the Connect button.
1. I/O connector
2. Power receptacle
3. Serial connector
5-3