Data Options Tab - Honeywell MX9 Reference Manual

Data Options Tab

Start > Settings > Control Panel > Data Collection > Data Options tab
Bar code manipulation parameter settings on this tab are applied to the incoming data resulting from successful bar code scans
sent to the MX9 for processing.
Note: The Data Options tab contains only those options available for one type of decoding engine.
The Data Options tab contains several options to control bar code processing. Options include:
Defining custom Code IDs
l
Disable processing of specified bar code symbologies
l
Rejecting bar code data that is too short or too long
l
Stripping characters including Code ID, leading or trailing characters and specified bar code data strings
l
Replacing control characters
l
Adding a prefix and a suffix.
l
MX9 with a Hand Held Products imager
4-88
MX9 with any other imager/scanner