Scanners And Imagers; Integrated Bar Code Decoders; Tethered Bar Code Decoders; Bluetooth Client Bar Code Decoders - Honeywell MX9 Reference Manual

Scanners and Imagers

Note: The maximum number of communication ports from which the Data Collection Wedge can simultaneously support
input is three.

Integrated Bar Code Decoders

The MX9 may have any of the following bar code readers built in (integrated) and protected by the hatch:
SE955 standard range laser scanner engine (bar code decoding only)
l
SE1524 Lorax laser scanner engine (bar code decoding only)
l
Hand Held Products (HHP) 5300SF laser imager engine (nondecoding)
l
A scan aperture heater is implemented for low temperature environments.

Tethered Bar Code Decoders

The external serial port at the base of the MX9 is used to connect (via serial tether) to bar code scanners as needed.

Bluetooth Client Bar Code Decoders

The Bluetooth Module in the MX9 can accept data from Bluetooth bar code readers.

GPS Module

The default setting for GPS is Off.
GPS (Global Positioning System) is a U.S. space-based radio navigation system that provides reliable positioning, navigation,
and timing services on a continuous basis. The primary function of the embedded GPS module is to provide worldwide location
to applications which are running on the MX9.
GPS presence is displayed on the Peripherals control panel. Using the GPS tab, GPS power can be toggled on or off only when
a GPS is installed.
See Also: "GPS Receiver Technical Specifications"
2-10