Honeywell MX9 Reference Manual page 78

Option Explanation
See following section titled
Launch
Note: AppLock Administrator Control panel file Launch option does not inter-relate with similarly-named options
Button
contained in other Control Panels.
Default is Ctrl+Spc. Select the Global Key key sequence the end-user is to press when switching between
Global
applications. The Global Key default key sequence must be defined by the AppLock Administrator. The Global key
Key
is presented to the end-user as the Activation key.
Default is 10 seconds. Enter the number of seconds that Applications must wait before starting to run after reboot.
Global
Note: Delay (Global) may not be available in all versions of AppLock. You can simulate a Global Delay function
Delay
by setting a delay for the first application (lowest Order) launched and setting the delay to 0 for all other
applications. See Boot Options.
Default is Disabled. Enable (check) to show the Keyboard option on the Switchpad menu. When enabled the input
Input
panel cannot be enabled or disabled for each individual application, and is available to the user for all configured
Panel
applications.
Clear Tap the Clear button to clear all currently displayed Filename or Application information. The Global settings are not
Button cleared.
Scroll Use the left and right scroll buttons to move from application setup screen to application setup screen. The left and
Buttons right buttons update the information on the screen with the previous or next configured application respectively.
4-34
Launch Button.