Reboot; Warm Boot - Honeywell HX3 User Manual

Microsoft windows ce 5 operating system

Hide thumbs Also See for HX3:

Table of Contents

Reboot

When the Windows desktop is displayed or an application begins, the power up (or reboot) sequence is complete.

Note:

Although the HX3 has no display or alphanumeric keypad, HX3 operating system screens can be viewed and

parameters manipulated using LXEConnect and ActiveSync on a connected desktop/laptop computer.

Start > Run

A warm boot function does not affect the operating system, but data and programs in RAM are cleared, and registry changes, if

any, are saved. Network, ActiveSync and Bluetooth connections will need to be re-established.

Tap Start > Run and type WARMBOOT.EXE or WARMBOOT. This command is not case sensitive. Tap the OK button. This

process takes less than 15 seconds. Temporary data not saved is lost.

The warmboot terminates the ActiveSync connection. The ActiveSync connection must be re-established after the HX3 boots.

Note:

There may be slight delays while the wireless client connects to the network, re-authorization for voice-enabled

applications completes, Wavelink Avalanche management of the HX3 startup completes, or Bluetooth relationships

establish or re-establish.

2-14

Table of Contents