Reboot (Restart) The Computer - Honeywell ScanPal EDA51 Series User Manual

8. Tap the OTA update file. The computer examines the file, and then starts the
9. Once the installation is complete (100%), select OK when prompted to Reboot

Reboot (Restart) the Computer

You may need to restart the computer to correct conditions where an application
stops responding to the system.
1. Save your files and close any open applications.
2. Press and hold the Power button until the options screen appears.
3. Tap Restart. The computer restarts.
If the touch panel display is unresponsive:
•
EDA51 User Guide
installation.
the computer. The computer reboots and finishes the update.
Press and hold the Power button for approximately 8 seconds until the
computer restarts.
75