Reboot (Restart) The Computer; About Enterprise Data Reset; Before You Begin - Honeywell CK65 Series User Manual

Reboot (Restart) the Computer

You may need to reboot the computer to correct conditions where an application
stops responding to the system.
1. Save your files and close any open applications.
2. Press and hold the Power button until the options screen appears.
3. Tap Reboot. The computer reboots.
If the touch panel display is unresponsive:
•

About Enterprise Data Reset

You can perform an Enterprise data reset if the methods below did not improve the
computer condition and all other troubleshooting methods have failed to resolve
the issue.
An Enterprise data reset provides a clean configuration for troubleshooting by
erasing all data from the Internal shared storage location on the computer. Data is
not erased from the IPSM Card location.
Caution: An Enterprise data reset results in data loss, only perform this
Note: This method of recovery may not be available if your system administrator has set
policies to prevent the reset use.

Before You Begin

•
•
•
CK65 Mobile Computer
Press and hold the Power button for approximately 8 seconds until the
computer reboots.
• Reboot
• Reset app preferences (Settings > System > Reset options)
• Reset Wi-Fi, Mobile & Bluetooth (Settings > System > Reset options)
procedure if all other recovery methods have failed. All personal
content is erased including, but not limited to emails, pictures,
contacts, Google account information, system settings and app
settings.
If you recently reset your Google Account password, wait 24 hours before
performing a Enterprise data reset.
Make sure you have your screen lock password, PIN or pattern if you activated
one. You will need this to reset the computer.
If you have a Google Account, back up your data and settings to your Google
Account so you can restore them if needed.
69