Misc; Capslock; Touch Screen Disable; Enable Keypad Backlight - Honeywell MX9 Reference Manual

Misc

Options on this tab configure device specific options. Note that options not available on the MX9 are dimmed or grayed out.

CapsLock

By default, CapsLock is disabled after a warmboot. To enable CapsLock after a warmboot, check this checkbox.

Touch Screen Disable

By default, the MX9 touch screen is enabled. To disable the touch screen after a warmboot, check this checkbox.

Enable Keypad Backlight

The keypad backlight default setting is to follow the display backlight setting until it is changed by the user.
Uncheck the checkbox to disable the keypad backlight.

Enable RFTerm Auto Launch

This option is enabled by default. This option, when disabled (unchecked) stops RFTerm from launching at bootup. When
RFTerm is not installed or has not been added to the registry Launch sequence, this checkbox is ignored at bootup.
4-156