Configuring The Mx9 With Lxeconnect; Install Lxeconnect - Honeywell MX9 Reference Manual

Configuring the MX9 with LXEConnect

LXEConnect allows a user to view the MX9 screen remotely from a PC using an ActiveSync connection:
Requirement : ActiveSync (version 4.5 or higher for Windows XP desktop/laptop computers) must be resident on the host
(desktop/laptop) computer. Windows Mobile Device Center (version 6.1 or higher) is required for a Windows
Vista/Windows 7 desktop/laptop computer. ActiveSync and Windows Mobile Device Center for the PC are available from the
Microsoft website. Follow their instructions to locate, download and install ActiveSync or Windows Mobile Device Center on
your desktop computer.
Note: For readability in this section, ActiveSync will be used in instructions and explanations. If you have a Windows Vista
or Windows 7 operating system on your desktop/laptop, replace ActiveSync with Windows Mobile Device Center.
ActiveSync is already installed on the MX9. The MX9 is preconfigured to establish a USB ActiveSync connection to a PC
when the proper cable is attached to the MX9 and the PC.
If the MX9 uses a serial port for ActiveSync, it will be necessary to configure the MX9 to use the serial port. Complete details
on the proper cables and port configuration are included in

Install LXEConnect

1. Install Microsoft ActiveSync on a PC with a USB port. For details, please see
2. Power up the MX9.
3. Connect the MX9 to the PC using the proper connection cable. Once connected, the ActiveSync dialog box appears. If
using the USB connection, the ActiveSync connection is automatically established. If using a serial connection, it is
necessary to initiate the connection from the MX9.
4. Select "No" for partnership when prompted. Dismiss any ActiveSync dialog boxes warning a partnership is not set up. It
is not necessary to establish a partnership to use LXEConnect. However, if a partnership is desired for other reasons,
one may be established now. More details on partnerships are included in ActiveSync Help.
5. When the ActiveSync screen appears, select Explore.
Initial Setup.
Initial Setup.
5-7