Bluetooth Bar Code Reader Setup - Honeywell MX9 Reference Manual

Bluetooth Bar Code Reader Setup

Please refer to the Bluetooth scanner manufacturer's User Guide; it may be available on the manufacturer's web site. Contact
Technical Assistance for Bluetooth product assistance.
Honeywell supports several different types of bar code readers. This section describes the interaction and setup for a mobile
Bluetooth laser scanner or laser imager connected to the MX9 using Bluetooth functions.
Prerequisites
The MX9 has the Bluetooth hardware and software installed. An operating system upgrade may be required. Contact
l
Technical Assistance
If the MX9 has a Bluetooth address identifier bar code label affixed, then Bluetooth hardware and software is installed.
l
The mobile Bluetooth laser scanner / laser imager battery is fully charged.
l
The MX9 main battery is fully charged. Alternatively, the MX9 may be in a powered cradle or cabled to AC/DC power.
l
Important: The bar code numbering examples in this segment are not real and should not be created or scanned with a
l
Bluetooth scanner.
To open the LXEZ Pairing program, tap Start > Settings > Control Panel > Bluetooth or tap the Bluetooth icon on the
l
desktop or tap the Bluetooth icon in the taskbar.
Locate the bar code label, similar to the one shown above, attached to the MX9. The label is the Bluetooth address identifier for
the MX9.
The mobile Bluetooth scanner / imager requires this information before discovering, pairing, connecting or disconnecting can
occur.
Note: The MX9 Bluetooth address identifier label should remain protected from damage (rips, tears, spills, soiling, erasure,
etc.) at all times. It may be required when pairing, connecting, and disconnecting new Bluetooth bar code readers.
for help.
4-73