Upce1- Advanced Properties - Honeywell MX9 Reference Manual

UPCE1- Advanced Properties

Start > Settings > Control Panel > Data Collection > Data Options
For a device with a Hand Held Products Imager, UPCE0 and UPCE1 are enabled as the same symbology at the
l
scanner; therefore the only way for the UPCE1 configuration to be used is if UPCE0 is disabled. When UPCE0 is
disabled, it will be scanned by the scanner, but rejected by DCWedge.
The UPCE0 and UPCE1 parameters are always set to match each other. Therefore if a change is made to a parameter
l
to either the EPCE0 or UPCE1 Advanced Properties that same change is automatically made to the Advanced
Properties for the other symbology.
Option
Transmit Check Character
Transmit Number System Digit
Expand Version E
Addenda - Read 2-digit
Addenda - Read 5-digit
Addenda - Required
Insert Separator
Default Value
Enabled
Enabled
Disabled
Disabled
Disabled
Enabled
Disabled
4-115