Registry - Honeywell MX9 Reference Manual

Registry

Start > Settings > Control Panel > Registry
Choose an MX9 software reload scheme.
Tab
When clicked, a standard load file dialog is opened, to allow the user to pick a Registry Save (.RSG) file. The
applet then copies the specified User registry file to the Active registry. The user is asked to verify a reboot,
Load User
and then the applet does a warmboot to activate the new registry.
Defaults
Load User Defaults takes 20 seconds from SD card, or 10 seconds from internal flash.
When clicked, a standard Save File dialog is opened, to allow the user to name the Registry Save (.RSG) file.
Save
The applet then copies the Active registry to the specified User registry file.
User
Defaults
Save User Defaults takes 30 seconds to save to SD card, or 10 seconds to save to internal flash.
The applet copies the Factory Default registry from the OS to the Active registry (by deleting the current
Load
registry). The user is asked to verify a reboot, and then the applet does a restart to activate the factory default
Factory
registry. If a user password has been set, the applet warns the user that the password will be erased, and asks
Defaults
them to enter it before the reboot is allowed.
Warmboot When clicked, the OS does a registry flush (Active registry saved to Flash registry hive), and then a warmboot.
Restart When clicked, the OS does a registry flush, and then a restart.
Contents
4-175