Lenovo ThinkServer TS200 6522 Hardware Maintenance Manual page 54

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v SeeChapter 7, "Parts listing, TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530," on page 201 to
determine which components are customer replaceable units (CRU) and which components are field
replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Watchdog %1 Failed to Capture
Screen.
(%1 = OS Watchdog or Loader
Watchdog)
Running the backup IMM main
application.
Please ensure that the IMM is
flashed with the correct firmware.
The IMM is unable to match its
firmware to the server.
IMM reset was caused by restoring
default values.
IMM clock has been set from NTP
server %1.
(%1 =
IBM_NTPService.ElementName)
46
ThinkServer TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530: Hardware Maintenance Manual
Error An operating-system error
has occurred, and the screen
capture failed.
Error The IMM has resorted to
running the backup main
application.
Error The server does not support
the installed IMM firmware
version.
Info The IMM has been reset
because a user has restored
the configuration to its
default settings.
Info The IMM clock has been set
to the date and time that is
provided by the Network
Time Protocol server.
1. Reconfigure the watchdog
timer to a higher value.
2. Make sure that the IMM
Ethernet over USB interface is
enabled.
3. Reinstall the RNDIS or
cdc_ether device driver for the
operating system.
4. Disable the watchdog.
5. Check the integrity of the
installed operating system.
6. Update the IMM firmware.
Important: Some cluster
solutions require specific code
levels or coordinated code
updates. If the device is part
of a cluster solution, verify
that the latest level of code is
supported for the cluster
solution before you update
the code.
Update the IMM firmware.
Important: Some cluster solutions
require specific code levels or
coordinated code updates. If the
device is part of a cluster
solution, verify that the latest
level of code is supported for the
cluster solution before you update
the code.
Update the IMM firmware to a
version that the server supports.
Important: Some cluster solutions
require specific code levels or
coordinated code updates. If the
device is part of a cluster
solution, verify that the latest
level of code is supported for the
cluster solution before you update
the code.
No action; information only.
No action; information only.