Installing An Adapter - Lenovo ThinkServer TS200 6522 Hardware Maintenance Manual

9. If you are not replacing the adapter, install an expansion-slot cover in the expansion-slot opening.
10. If you are instructed to return the adapter, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.

Installing an adapter

The following notes describe the types of adapters that the server supports and other information that
you must consider when you install an adapter. Adapter that the server supports might vary, depending
on your server model.
v Locate the documentation that comes with the adapter and follow those instructions in addition to the
instructions in this section. If you must change the switch setting or jumper settings on the adapter,
follow the instructions that come with the adapter.
v Read the documentation that comes with your operating system.
v The server comes with the following adapter connectors or slots:
– Slot 1, PCIe2 x8 (x8, x4, x1) 25W
– Slot 2, PCIe2 x8 (x8, x4, x1) 25W
– Slot 3, PCIe2 x1 10W
– Slot 4, PCI 32bit, 33MHz
– Slot 5, PCI 32bit, 33MHz
v Some server models come with a ServeRAID-BR10il v2 SAS/SATA RAID controller installed. The
ServeRAID-BR10il v2 controller enables integrated RAID levels-0 and level-1.
Chapter 6. Replacing FRUs
153