Table of Contents
Advertisement
POST
When you turn on the server, it performs a series of tests to check the operation of the server components
and some optional devices in the server. This series of tests is called the power-on self-test, or POST.
Note: This server does not use beep codes for server status.
If a power-on password is set, you must type the password and press Enter, when prompted, for POST to
run.
If POST detects a problem, an error message is displayed. See "POST error codes" on page 21 for more
information.
18
ThinkServer TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530: Hardware Maintenance Manual
Advertisement
Table of Contents
