Cash-In-Drawer Limit Programming - Sam4s ER-380M Operation And Program Manual

Cash-In-Drawer Limit Programming

You can set a limit for cash in drawer. When cash in drawer exceeds the limit you program here, a
warning will display on the screen. You must press CLEAR to remove the warning and continue
operations. The warning will continue to appear at the completion of every transaction with the limit
exceeded, until you use the PAID OUT function to remove cash from the drawer.
Programming the Drawer Limit
ER-380 / ER-380M
1. Turn the control lock to the P position.
2. To begin the program, enter 1 1 0 0, press the SBTL key.
1 1 0
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME
key.
Enter the cash
limit, up to 8
digits
4. Press the CASH key to finalize the program.
CASH
0 SBTL
X/TIME
Program Mode Programming • 159