Miscellaneous Programming; Macro Key Sequence Programming - Sam4s ER-380M Operation And Program Manual

Miscellaneous Programming

Macro Key Sequence Programming

Macros are special function keys that are used to execute a sequence of key depressions. For
example, a macro might be used to execute a string of reports or to automatically tender a preset
amount. Up to ten different macros may be placed on the keyboard. (See "Function Key Assignment
Programming" to place macros on the keyboard.)
To Program a Macro
To removing a Macro
the INACTIVE function.
ER-380 / ER-380M
1. Turn the control lock to the P position.
2. To begin the program, enter 1 5 0 0, press the SBTL key.
1 5 0
3. Press the Macro key that you wish to program.
MACRO
4. First, you must change the Mode Key. Default Mode is PGM Mode.
Therefore, if you want to start in REG Mode, you must change Mode key to
REG Mode. Type up to 50 key stokes
Type up to 50 key strokes
5. Turn the control lock to the P position. Press the same Macro key to end the
sequence
MACRO
6. Repeat from step 3 - 5 to program additional macros. Press the CASH key to
finalize the program.
CASH
If you wish to remove a keystroke from a macro, replace the current function with
0 SBTL
Program Mode Programming • 151