Sam4s ER-380M Operation And Program Manual page 163

Programming the Financial Report Message
The Financial Report selection allows you to reprogram the descriptors that appear with the Financial
Report totals and counters. For example, the first total on the financial report "+PLU TTL" represents
the total of all positive PLU entries. You might wish to re-label this total to say "FOOD SALES".
You can reprogram any of the Financial Report totals listed here with any 18-character descriptor. (See
"Financial Report Message").
ER-380 / ER-380M
1. Turn the control lock to the P position.
2. To begin the program, enter 7 0 1, press the SBTL key.
7 0 1
3. Refer to the chart below and enter the number that represents the line you wish
to program; press the X/TIME key.
X X/TIME
4. If you are programming
Enter up to 18
three-character
codes
5. Press the CASH key to finalize the program.
CASH
SBTL
SBTL
Program Mode Programming • 153