Program Mode Programming; Default Programming; Descriptor Programming Methods - Sam4s ER-380M Operation And Program Manual
Hide thumbs
Also See for ER-380M:
- Operation and program manual (183 pages) ,
- Service manual (110 pages) ,
- Operator's manual (152 pages)
Table of Contents
Advertisement
Program Mode Programming
Default Programming
Descriptor Programming Methods
Descriptors are programmable for PLUs, function keys, groups, clerks and the logo/messages.
There is a method available to program descriptors, the program Descriptor Code Method.
.
ER-380 / ER-380M
•
All keyboard PLUs are nontaxable and open, without entry limits by default
status programming of "00000000".
•
All system options are set to 0 in default programming, unless otherwise noted.
Change only the options that will deviate from default programming. There is no
need to re-enter an option status of 0, since 0 is its original setting.
•
All programming (unless otherwise noted) is done with the control lock in the P
position. Each section details a specific area of register programming.
Program Mode Programming • 81
Advertisement
Table of Contents
