Date And Time Programming - Sam4s ER-380M Operation And Program Manual

Date and Time Programming

Use this program to set the clock and calendar on your ER-380 / ER-380M. The date changes
automatically. After initial setting, time changing will probably be required only for beginning and
ending daylight savings time.
Programming the Date and Time
ER-380 / ER-380M
1. Turn the control lock to the P position.
2. To begin the program, enter 1 3 0 0, press the SBTL key.
1 3 0
3. Enter time in military standard time (based on 24 hours), must be four digits
(i.e. 1300 hours = 1:00 PM); press the X/TIME key.
H H M
4. Enter the date in MM (month) DD (day) and YY (year) format. Press the
X/TIME key:
M M D
5. Press the CASH key to finalize the program.
CASH
0 SBTL
M X/TIME
D Y Y X/TIME
Program Mode Programming • 161