Removal And Reinstallation Of Covers And Pc Boards; Removal And Reinstallation Of Covers - Toshiba DP1600 Service Manual

2.6 Removal and Reinstallation of Covers and PC Boards

2.6.1 Removal and reinstallation of covers

[A] Rear cover
1. If a STP (KK-1600) is attached to the copier,
disconnect the power cable.
2. Detach the manual pocket.
3. Remove all screws (17 or 9) and detach rear
cover.
[B] Top cover
1. If an Original Cover (KA-1600PC), ADF
(MR-2012), or the RADF (MR-3011) is attached
to the copier, detach it.
2. If a STP (KK-1600) is attached to the copier,
disconnect the power cable.
3. Detach the manual pocket.
4. Remove 3 screws, release hook, and detach
top cover.
[C] Scanner cover
1. If an Original Cover (KA-1600PC), ADF
(MR-2012), or the RADF (MR-3011) is attached
to the copier, open it.
2. Remove the cushion rubber at 3 places.
December 2000 © TOSHIBA TEC
Fig. 2-6-1
Position of 9 screws
Fig. 2-6-1-1
Screw
Top cover
Fig. 2-6-2
Fig. 2-6-3
2 - 21 1600/2000/2500 OUTLINE OF THE MACHINE
01/05
Screw
Rear cover
Screw
001
Hook
002
Cushion rubber
003-1