Removal And Storage Of Fixing Screw - Toshiba e-STUDIO161 Service Manual

B.Toner cartridge installation
1) Shake the toner cartridge several times horizontally, and remove the
tape.
* Do not hold the shutter lever when shaking.
* After removing the tape, do not tilt or shake the toner cartridge.
4 or 5 times
Shutter
Handle
2) Attach the toner cartridge to the copier.
3) Pull the shutter lever.
Close the front cover A, then close the side cover B.
•When closing the front cover, gently press the both sides.
•When closing the side cover, hold the knob.
•When closing the covers, be sure to close the front cover first, then
close the side cover. If closed in a wrong sequence, the covers may be
broken.
e-STUDIO161 UNPACKING AND INSTALLATION

4.Removal and storage of fixing screw

1) Lift the knob and gently pull out the tray.
Tape
2) Hold the paper pressure plate and turn the fixing screw in the arrow
3) Store the fixing pin and the fixing screw in the tray.
•Store the fixing screw which was removed in the above procedure 2 and
the fixing screw which was removed in procedure 2 of 2.
•Removal of protective material and fixing screw in the storage place in
the tray.
5-2
direction.