Toshiba DP1600 Service Manual page 40

[Q] Front frame cover F/R
1. If a Finisher (MJ-1011) is attached to the copier,
detach the finisher plate and junction block.
2. If a JSP (MJ-5001) or OCT (MJ-5002) is at-
tached to the copier, detach it.
3. If an Original Cover (KA-1600PC), ADF
(MR-2012), or the RADF (MR-3011) is attached
to the copier, open it.
4. If an ADU (MD-0101) is attached to the copier,
open it.
5. Detach scanner cover. (See Fig. 2-6-3 and 2-6-4)
6. Detach control panel front cover. (See Fig. 2-6-7)
7. Detach control panel bottom cover. (See Fig. 2-6-8)
8. Open side cover.
9. Open exit cover.
10. Remove one screw, release 4 hooks, and de-
tach front frame cover F and front frame cover
R.
[R] Exit cover
1. If a Finisher (MJ-1011) is attached to the copier,
detach the finisher plate and junction block.
2. If a JSP (MJ-5001) or OCT (MJ-5002) is at-
tached to the copier, detach it.
3. If an Original Cover (KA-1600PC), ADF
(MR-2012), or the RADF (MR-3011) is attached
to the copier, open it.
4. If an ADU (MD-0101) is attached to the copier,
open it.
5. Detach scanner cover. (See Fig. 2-6-3 and 2-6-4)
6. Detach control panel front cover. (See Fig. 2-6-7)
7. Detach control panel bottom cover. (See Fig. 2-6-8)
8. Detach front frame covers F and R.
(See Fig. 2-6-19 and 2-6-20)
9. Remove stop ring and detach exit cover.
December 2000 © TOSHIBA TEC
Fig. 2-6-19
Front frame cover R
Hook
Front frame cover F
Hook
Fig. 2-6-20
Fig. 2-6-21
2 - 27 1600/2000/2500 OUTLINE OF THE MACHINE
01/05
Exit cover
Side cover
017
Screw
018
Stop ring
Exit cover
019