14. Remove carriage 2 by turning it by 45 degrees.
15. Remove spring plate securing mirror 2 and re-
move mirror 2.
Note: Clean the surface of mirror 2 if dirty.
16. Remove spring plate securing mirror 3 and re-
move mirror 3.
Notes: 1. Clean the surface of mirror 3 if dirty.
2. For mounting Carriage 2, refer to the Ser-
vice Handbook. (See Chapter 1.8)
[CAUTION]
Never turn the angle adjusting screw of mirror.
1600/2000/2500 SCANNER
Spring plate
Spring plate
Spring plate
Mirror 3
Screw
7 - 30
Carriage 2
Fig. 7-8-28
Spring plate
Mirror 2
Fig. 7-8-29
Spring plate
Spring plate
Fig. 7-8-30
December 2000 © TOSHIBA TEC
060-1
060-2
060-3