Toshiba DP1600 Service Manual page 37

[I] Ozone filter/ozone cover
1. If a JSP (MJ-5001) or OCT (MJ-5002) is at-
tached to the copier, detach the tray.
2. Lift ozone cover off while holding both sides.
3. Detach ozone filter.
[J] Paper tray cover
1. If a Finisher (MJ-1011) is attached to the copier,
detach the finisher plate and junction block.
2. If a JSP (MJ-5001) or OCT (MJ-5002) is at-
tached to the copier, detach it.
3. Detach the toner cartridge.
4. Detach ozone cover. (See Fig. 2-6-10)
5. Remove 3 screws, release 2 tabs, and detach
power switch cover.
6. Detach paper tray cover.
[K] Paper cassette
1. Draw out paper cassette and lift it off in the di-
rection of the arrow.
[L] Left cover
1. If a Finisher (MJ-1011) is attached to the copier,
detach it.
2. Remove 3 screws holding the paper tray cover.
(See Fig. 2-6-11)
3. Take out the paper cassette.
4. Remove 4 screws and detach left cover.
1600/2000/2500 OUTLINE OF THE MACHINE
Ozone filter
Ozone cover
Paper tray cover
Screw
Left cover
Screw
2 - 24
Ozone cover
Fig. 2-6-10
Power switch
cover
Fig. 2-6-11
Paper cassette
Fig. 2-6-12
Paper cassette
Fig. 2-6-13
December 2000 © TOSHIBA TEC
008
009
010
011