Toshiba DP1600 Service Manual page 60

4. Detach the main charger assembly.
Note: Be sure not to touch the grid part of the main
charger grid.
5. Release 4 hooks and detach the main charger
grid.
6. Pull out the main charger wire bracket and re-
move the main charger wire located in front side
from the spring.
7. Remove the main charger wire located in rear
side from the hook.
Notes: 1. Be sure to attach the main charger wire
through the space between the main
charger cleaning pads. (See Fig. 3-4-7.)
2. Do not touch the main charger wire with
your fingers.
3. Clean the inside of the main charger as-
sembly if toner is stuck.
December 2000 © TOSHIBA TEC
1
Fig. 3-4-4
Main charger grid
Fig. 3-4-5
Main charger wire
bracket
Spring
Fig. 3-4-6
Main charger wire
cleaning pad
Fig. 3-4-7
3 - 11 1600/2000/2500 COPYING PROCESS
01/11
2
Main charger
assembly
Hook
Hook
Main charger wire
Hook
Main charger wire
Main charger wire
cleaning pad
3-4-04
3-4-05
3-4-06
3-4-07