Toshiba DP1600 Service Manual page 132

12. Remove 2 screws and remove scanner motor.
Note: For adjusting the timing belt when mount-
ing the scanner motor, refer to the Service
Handbook. (See Chapter 1.8)
[D] INV PWA
(DP1600 series)
1. If an Original Cover (KA-1600PC), ADF
(MR-2012), or the RADF (MR-3011) is attached
to the copier, detach it.
2. Detach top cover. (See Fig. 2-6-2)
3. Detach 2 connector from INV PWA (CN1/CN2).
4. Remove 2 screws and remove INV PWA as-
sembly.
5. Remove one screw, release locking support,
and remove INV PWA.
1600/2000/2500 SCANNER
047
Scanner motor
bracket 2
INV PWA
assembly
Screw
CN2
Screw
7 - 22
Scanner motor
Fig. 7-8-11
Screw
CN1
Fig. 7-8-12
INV PWA
INV PWA plate
Fig. 7-8-13
December 2000 © TOSHIBA TEC
Screw
049-1
049-2