Toshiba DP1600 Service Manual page 35

3. Remove 3 screws and detach scanner cover.
[D] Top cover L
1. If a Finisher (MJ-1011) is attached to the copier,
detach the finisher plate.
2. If an Original Cover (KA-1600PC), ADF (MR-2012),
or the RADF (MR-3011) is attached to the copier,
detach it.
3. If a STP (KK-1600) is attached to the copier, dis-
connect the power cable.
4. Detach the manual pocket.
5. Detach top cover. (See Fig. 2-6-2)
6. Remove 2 screws, release 2 tabs, and detach
top cover L by lifting in the direction of the arrow.
[E] Top cover R
1. If an Original Cover (KA-1600PC), ADF (MR-2012),
or the RADF (MR-3011) is attached to the copier,
detach it.
2. If a STP (KK-1600) is attached to the copier,
detach it.
3. Detach the manual pocket.
4. Detach top cover. (See Fig. 2-6-2)
5. Remove 3 screws, release 2 tabs, and detach
top cover R by lifting in the direction of the arrow.
1600/2000/2500 OUTLINE OF THE MACHINE
Screw
Scanner cover
Tab
Screw
Top cover R
Tab
2 - 22
01/05
Fig. 2-6-4
Top cover L
Tab
Fig. 2-6-5
Tab
Screw
Screw
Fig. 2-6-6
December 2000 © TOSHIBA TEC
003-2
004
005