Fuser Unit/Exit Unit; General Description; Construction - Toshiba DP1600 Service Manual

14. FUSER UNIT/EXIT UNIT

14.1 General Description

The fuser unit applies heat and pressure to a toner image formed on the paper to fix it to the paper.
The paper exit unit transports the paper, for which the fusing process has ended, to the paper tray cover.

14.2 Construction

Exit roller
Pinch roller
Fuser thermostat
Heater thermistor
The fuser unit consists of the following parts:
• Heater lamp
• Heater roller
• Pressure roller
• Separation claw
• Cleaner fuser roller
• Heater thermistor
• Fuser thermostat
The exit unit consists of the following parts:
• Exit roller
• Pinch roller
• Exit guide
• Exit sensor
December 2000 © TOSHIBA TEC
Heater roller
Heater lamp
14 - 1
Exit unit
Exit guide
Exit sensor
Separation claw
Fuser unit
Pressure roller
Cleaner fuser roller
1600/2000/2500 FUSER UNIT/EXIT UNIT
14-02-01