7.3 Scanner Motor Operation
Carriage 2 roller
Carriage 2
Wire roller
Rotation of the scanner motor is transmitted to carriages 1 and 2 via the timing belt and carriage drive
wire. First of all, carriages 1 and 2 moves to the home position. Home position is detected by carriage 1
passing the home position sensor. Carriages 1 and 2 then scan the original when the [START] key on the
control panel is depressed.
December 2000 © TOSHIBA TEC
Carriage 1
Timing belt 142
Wire
Scanner motor
Scanner motor pulley
7 - 5
Timing belt 157
Wire roller
Scanner drive shaft
Scanner drive gear
1600/2000/2500 SCANNER
08-03-01