Changing Display Key Assignments; Call Control From The Pc; Initiating Calls From The Pc - Unify OpenStage M3 Plus User Manual

Additional functions
s t
CTI Call In
[Extension]
c
CTI Call Out
[Extension]

Changing display key assignments

You can assign functions to display keys and/or change the current assignment.
The function is then started by pressing the key.
Changing the assignment
Press and hold the required display key.
?
A list of the functions that can be programmed on the key is displayed. The fol-
lowing functions are available for selection:
• INT
• Alarm Clock
• Calendar
• Bluetooth
• Redial
[
Select and confirm an entry.
Calling the function
Press the required display key briefly.
?
The function is selected.

Call control from the PC

You can initiate calls using a CTI program (CTI = Computer Telephony Integra-
tion). The call is conducted as usual on your handset.
The CTI program depends on your communications platform:
• OpenScape Office LX/MX: myPortal
• OpenScape Voice: WebClient

Initiating calls from the PC

Call a subscriber using a CTI program (see operating instructions for software).
Your handset rings and the message "CTI Call In" and the phone number/name
of the subscriber is displayed.
Accept the call. As soon as you lift the handset, the subscriber is called.
51