Registering Bluetooth Devices - Unify OpenStage M3 Plus User Manual

Additional functions
u v
ò
Bluetooth
s t
Search Data Device
s t
Trust Device
s t
agreed PIN:
s t
Repeat Search

Registering Bluetooth devices

The distance between the handset in Bluetooth mode and the activated Blue-
tooth device (headset or data device) should be no more than 10 m.
To connect a Bluetooth headset, see
If the Bluetooth connection is not yet established between the handsets, perform
the following steps:
Searching on your handset
v
Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm. The handset searches for Bluetooth-enabled
devices. This may take a few minutes. If devices are found, these will be shown
in a list.
s t
Select the required device, for example, the other handset.
Trusting the device
Press the display key.
Options
[
Select the menu item and confirm.
[
Enter the Bluetooth PIN and confirm (default: 0000). The device is saved in the
list of known devices.
Cancelling/repeating current search
Press the display key to cancel the search.
Cancel
or
Press the display key.
Options
[
Select and confirm the menu item in order to repeat the search.
Page 27.

53