Alarm Types (Overview) - Unify OpenStage M3 Plus User Manual

74
Language support in Additional Features menu
The Additional Features menu is only available in German and English.
If you choose a language other than German when setting the language, the dis-
play output in the Additional Features menu will be in English.

Alarm types (overview)

Alarm Type
Manual personal alarm
Automatic personal alarm
Technical warning
Prealarm
Personal alarm functionality
Explanation
Triggered by pressing the red alarm key on the handset.
Triggered independently by the handset after a
specific time if a defined event occurs and the pre-
alarm (see below) was not confirmed by the per-
son in question:
• Person no longer moving (Non Movement)
• Person falls (Man Down Alarm)
• Person does not respond to the prealarm which
is signalled if there is no input on the handset for
a configurable period (Time Alarm)
• Person loses the handset (Pull Cord Alarm; with
pull cord)
• Person is moving frantically (Escape Alarm)
The particular alarms that are activated on your
handset depend on your handset's PNG configu-
ration. Response times, prealarm times and
acoustic alarm signals can likewise be set on the
handset.
The settings must be performed before the hand-
set is commissioned initially.
If a technical fault occurs on the handset, for ex-
ample low battery charge, you will hear an error
tone.
The prealarm sounds before an automatic person-
al alarm. If the prealarm is confirmed within a cer-
tain time by the user, the automatic personal alarm
is not triggered.