Fitting The Attachment Clip - Unify OpenStage M3 Plus User Manual

On hipath cordless ip

Hide thumbs Also See for OpenStage M3 Plus:

Table of Contents

Putting the handset into service

To disconnect the flat plug from the charger, press the release button and dis-

connect the flat plug.

Fitting the attachment clip

1. Press the attachment clip pin on the back of the handset until the tabs on the

sides engage audibly in the recesses on the phone.

2. Slide the attachment clip onto the pin as it clicks audibly into place.

3. Secure the handset with the attachment clip to the belt. To do this, open the

brackets by squeezing the free end and attach it to the belt.

To remove the handset, press the opener on the attachment clip and slide the

handset from the pin.

Table of Contents

Openstage m3ex plus Openstage m3