Conducting Calls - The Basic Functions; Activating/Deactivating The Handset - Unify OpenStage M3 Plus User Manual

22
Please enter
PIN:
Conducting calls – the basic functions
You can use your handset to make both internal and external calls.
Internal calls are calls that
• you make within the range of a communications system, for example, within
your company,
• you make between networked communications systems, for example, to dif-
ferent company locations.
External calls are calls that you conduct with users of the public telephone net-
work.

Activating/deactivating the handset

a
Press the On-hook key until the activation or deactivation is confirmed by a sig-
nal.
PIN
If the default PIN has not been changed (0000), the handset is ready for opera-
tion as soon as it is switched on. If a PIN was set, it must be entered before the
handset can be operated.
o
Enter the PIN.
[
Confirm your entry. The handset is ready to use.
Displaying the connection quality
The strength of the incoming signal is displayed by the "receive field strength"
icon in idle status:
|
Flashing, no reception
Ò
Low receive field strength
Ñ
50% receive field strength
i
75% receive field strength
Ð
100% receive field strength
The radio range is different indoors and outdoors
your system administrator in the event of range problems.
Charging the battery
You may only use the charging shell provided for the handset.
The handset charges when sitting in the charging shell, even when deactivated.
If the handset deactivates because the battery is flat, it automatically reactivates
and is ready for operation as soon as you place it in the charging shell. The
charging operation starts. If a PIN was set, it must be entered first to allow charg-
ing to start.
Conducting calls – the basic functions
Page 82. Please consult
