CarE & ClEanIng
fIltEr In tHE WatEr tanK
Soak the water filter for
Rinse filter & mesh
The water filter provided helps to prevent
scale build up which over time can affect the
performance of your machine, potentially
causing blockages and heating, problems
Replacing the water filter every two months
will reduce the need to de-scale the machine.
If you live in a hard water area, we
recommend you change the water filter
replacing the Water filter
Remove the filter from the plastic bag,
and soak in a cup of water for 5 minutes.
Rinse the filter under cold running water
for 5 seconds.
Wash the stainless steel mesh in the
plastic filter compartment with water
Set the date dial 2 months ahead.
To install, push down to lock into place.
The water filter can be removed from the
water tank during operation if not required.
To purchase replacement water filters
please contact Sage
Customer Service on
0844 334 5110.
Set date 2 months ahead
Install filter in water tank
Insert & lock water tank
Periodically run water through the machine
with the portafilter in place, but without
any ground coffee, to rinse out any residual