CarE & ClEanIng
ClEanIng tHE oUtEr HoUSIng /
CUP WarmIng PlatE
The outer housing and tray warming plate
can be cleaned with a soft, damp cloth. Then
polish with a soft, dry cloth.
Do not use abrasive cleansers, pads or cloths
which can scratch the surface.
ClEanIng tHE drIP tray
The drip tray should be removed, emptied
and cleaned at regular intervals, particularly
when the drip tray full indicator is showing
Remove grid, compartments and EMPTY
ME! indicator from the drip tray. Dispose of
the grounds from the dry compartment into
the bin. Wash the drip tray with warm soapy
water, using a non-abrasive washing liquid,
rinse and dry thoroughly. The EMPTY ME!
indicator can be removed from the drip
tray by pulling upwards to release the
The drip tray base and cover are
ClEanIng tHE StoragE tray
The storage tray is located behind the drip
tray and is pulled forward when you slide
the drip tray out. Clean the tray with a soft,
damp cloth (do not use abrasive cleansers,
pads or cloths which can scratch the surface).
StorIng yoUr maCHInE
Before storing, press the POWER button to
off, turn the steam dial to STANDBY switch
Off at the power outlet and unplug.
Remove unused beans from the hopper,
clean the grinder (see page 24), empty the
water tank and the drip tray.
Ensure the machine is cool, clean and dry.
Insert all accessories into position or into
the storage tray.
Store upright. Do not place anything on top.
Do not immerse power cord, power
plug or appliance in water or any
other liquid. The water tank should
never be removed or completely
emptied during decalcifying.