Master Cylinder Inspection; Master Cylinder Reassembly And Installation - Suzuki GSF650S Service Manual

5-64 CHASSIS
• Remove the push rod 0, piston/primary cup A and spring B.

MASTER CYLINDER INSPECTION

MASTER CYLINDER
Inspect the master cylinder bore for any scratches or other dam-
age.
PISTON
Inspect the piston surface for any scratches or other damage.
RUBBER PARTS
Inspect the primary/secondary cup and all of the rubber parts for
damage.
MASTER CYLINDER REASSEMBLY AND
INSTALLATION
Reassemble and install the master cylinder in the reverse order
of removal and disassembly. Pay attention to the following
points:
$
* Wash the master cylinder components with new
brake fluid before reassembly.
* Do not wipe the brake fluid off after washing the
components.
* When washing the components, use the specified
brake fluid. Never use different types of fluid or
cleaning solvents such as gasoline, kerosine, etc.
* Apply brake fluid to the master cylinder bore and all
of the master cylinder components before reassem-
bly.
- Specification and classification: DOT 4
• Apply SUZUKI SILICONE GREASE to the push rod end.
. 99000-25100: SUZUKI SILICONE GREASE