• Apply THREAD LOCK SUPER to the driveshaft.
% 99000-32030: THREAD LOCK SUPER "1303"
• Tighten the engine sprocket nut 1 to the specified torque.
# Engine sprocket nut 1: 115 N·m (11.5 kgf-m)
• Apply a small quantity of THREAD LOCK "1342" to the speed
sensor rotor bolt.
& 99000-32050: THREAD LOCK "1342"
• Tighten the speed sensor rotor bolt 2 to the specified torque.
# Speed sensor rotor bolt 2: 20 N·m (2.0 kgf-m)
• Before installing the engine sprocket cover, apply a small
quantity of SUZUKI SUPER GREASE "A" to the clutch
release mechanism.
' 99000-25010: SUZUKI SUPER GREASE "A"
• Install the spark plug caps onto the spark plugs. Make sure
that each spark plug cap is installed in the correct location.
The number on each spark plug cord refers to the appropriate
cylinder.
ENGINE
#3
#2
#1
3-9
#4