INSPECTION AND DISASSEMBLY
TIRE ........................................................... (!2-18, 5-66)
WHEEL ...................................................... (!5-9)
AXLE SHAFT............................................. (!5-9)
BRAKE DISC ............................................. (!5-52)
(Use the front wheel specifications and procedure.)
DUST SEAL
• Inspect the wheel and sprocket mounting drum dust seal for
wear or damage. If any damage is found, replace the dust
seal with a new one.
BEARING
Inspect the play of the wheel and sprocket mounting drum bear-
ings by hand while they are in the wheel and drum. Rotate the
inner race by hand to inspect for abnormal noise and smooth
rotation. Replace the bearing if there is anything unusual.
• Remove the wheel and sprocket mounting drum dust seal
using the special tool.
% 09913-50121: Oil seal remover
CHASSIS
5-31